Bosch D1260 - Page 62

76 pages

To Next Page

To Previous Page

Security System | User's Guide | Part II: System Commands - UNBYPASS A POINT? (COMMAND + 0 + 0)

Bosch Security Systems | 9/04 | 4998122475D 62

7. You can return to idle text by pressing the <Exit soft key.

Main Page

Security System1
Table of Contents3
Introduction6
About this User's Guide7
Part I: Security System Basics8
Using the Keypad8
Keypad Keys8
Points10
What Is a Point10
Controlled Points10
Perimeter Points10
Interior Points10
24-Hour Points10
Fire Points10
Non-Fire Points11
Your Custom Display12
View Faulted or Bypassed Points14
To Automatically Scroll Faulted or Bypassed Points14
To Manually Scroll Faulted or Bypassed Points15
Warning Displays and Tones15
Keypad Quiets for Keystrokes15
Priority of Events15
Fire Alarms16
Silencing Fire Alarms16
Burglary Alarms18
Silencing Burglary Alarms18
Fire Trouble and Fire Supervisory Events19
Silencing Fire Trouble and Fire Supervisory Conditions19
Special Fire Trouble and Fire Supervisory Displays19
Non-Fire Point Trouble and Supervisory Events20
Silencing Non-Fire Trouble and Supervisory Events20
Viewing Fire Trouble and Fire Supervisory Conditions20
Viewing Non-Fire Trouble Events21
Special System Trouble Display21
Entry Delay Tone and Display21
Exit Delay Tone and Display23
Keystroke Checking Tones23
Silencing an Alarm24
How Your System Reports Alarms24
Part II: System Commands25
Passcode Protected Commands and Functions27
Turning the System on (Arming)28
To Turn Your Security System on (Arm)28
Turning the System off (Disarming)29
To Turn Your Security System off (Disarm)29
Turning the System on (Arming) with a Duress Passcode30
Turning the System on (Arming) with Doors or Windows Open31
Command Key33
Master Arm ? (Command + 1)35
Description35
Using Master Arm35
Master Arming All Areas37
Perimeter Instant (Command + 2)38
Turn on the Perimeter with no Delays38
Using Perimeter Instant38
Perimeter Delay ? (Command + 3)40
Turn on the Perimeter with Delays40
Using Perimeter Delay40
Silence Trouble Sounder/Clear Trouble Display (COMMAND + 4)42
Description42
Using COMMAND 442
View Event Memory43
View Memory ? (Command + 4 + 0)43
Walk Test ? (Command + 4 + 4)45
Walk Test45
Using Walk Test45
Reset Sensors ? (Command + 4 + 7)49
Reset Sensors49
Using Reset Sensors49
Watch Mode ? (Command + 6)51
Description51
Using Watch Mode51
Perimeter Partial ? (Command + 8)53
Partially Turn on the Perimeter53
Special Alerts (COMMAND + 7, COMMAND + 9)55
Description55
Using COMMAND 755
Using COMMAND 956
Bypass a Point? (Command + 0)57
Description57
Using Bypass a Point57
Unbypass a Point? (Command + 0 + 0)60
Description60
Using Unbypass a Point60
Appendix63
Security System Limitations63
Fire Safety and Evacuation64
Standard Displays67
System Trouble Displays70
Security System Glossary73

Bosch D1260 - Page 62

Table of Contents

Other manuals for Bosch D1260

Related product manuals