D6412/D4412 Operation and Installation Guide
Page 8 © 2003 Bosch Security Systems45349E
D6412/D4412
Introduction
1.2 Other Literature Referenced
Throughout this guide, references are made to other documentation. Review the documents in the table below for a complete
description of the panel. Part numbers are included for ordering purposes.
Document Name Part Number
D6412/D4412 Program Entry Guide 45351
D6412 Program Record Sheet 45350
D4412 Program Record Sheet 50485
D6412/D4412 TSN: Smoke Detector Compatibility 46928
User's Guide for LED Command Centers 46840
User's Guide for Text Command Centers 46841
D6412 Firmware Release Notes 46929
D4412 Firmware Release Notes 50482
DX2010 Installation Guide 49533
DX3010 Installation Guide 49529
DX4010 Installation Guide 49539
Table 2: Other Literature Referenced
1.3 Documentation Conventions
These conventions are intended to call out important features, items, notes, cautions, and warnings that the reader should be
aware of in reading this document.
1.3.1 Type Styles Used in this Guide
To help identify important items in the text, the following type styles are used:
Bold text Usually indicates selections that you may use while programming your
panel. It may also indicate an important fact that should be noted.
Bold italicized Used to denote notes, cautions, and/or warnings.
Italicized text Refers the user to another part of the guide or to another document entirely.
Courier text Indicates what may appear on the command center/keypad or in a report
received at the central station receiver.
[Text in brackets] Indicates to the user that a specific key should be pressed. Example: Press
[Cmd] to exit this feature.
1.3.2 Tips, Important Notes, Cautions, and Warnings
Throughout this document, helpful tips, important notes, cautions and warnings are presented for the reader to keep in
mind. These appear different from the rest of the text as follows;
Important Notes - should be heeded for successful operation and programming. Also, tips and shortcuts may be
included here.
Caution - These caution the operator that physical damage to the panel and/or optional equipment may occur.
Warning - These warn of the possibility of physical damage to the operator and/or equipment.