Need help?Do you have a question about the Bosch D9210C and is the answer not in the manual?
Identifier for the door being programmed, with options 1-8.
Assigns an area to the door controller for polling and exit requests.
Defines the command center scope for user disarming rights.
Assigns a point number to the door for system monitoring and status.
Assigns an interlock point to prevent access when faulted.
Determines if the door unlocks automatically when the entry area is disarmed.
Activates strike relay and shunts door zone automatically upon a Fire Alarm.
Specifies if the door must be physically opened to disarm the area after a valid access request.
Identifier for the door being programmed, with options 1-8.
Sets the duration for which the strike relay activates to allow door opening.
Sets the duration the door point is shunted to allow access without fault.
Sets the duration for the buzzer notification when the strike is activated.
Prolongs strike, buzz, and shunt activation if the door remains open.
Determines if the strike deactivates immediately upon physically opening the door.
Disables strike but activates shunt time for Request to Enter events.
Disables strike but activates shunt time for Request to Exit events.
Identifier for the door being programmed, with options 1-8.
Determines if Access Granted and Door Request events are sent to the panel.
Determines if No Entry (Access Denied) events are sent to the panel.
Determines if Request to Enter (RTE) events are sent to the panel for processing.
Determines if Request to Exit (REX) events are sent to the panel for processing.
Supplementary notes related to Event Profile configurations.
Section for recording summary account and customer site information.
Fields to record door, point, text, and location for system configuration.
Identifier for the door being programmed, with options 1-8.
Assigns an area to the door controller for polling and exit requests.
Defines the command center scope for user disarming rights.
Assigns a point number to the door for system monitoring and status.
Assigns an interlock point to prevent access when faulted.
Determines if the door unlocks automatically when the entry area is disarmed.
Activates strike relay and shunts door zone automatically upon a Fire Alarm.
Specifies if the door must be physically opened to disarm the area after a valid access request.
Identifier for the door being programmed, with options 1-8.
Sets the duration for which the strike relay activates to allow door opening.
Sets the duration the door point is shunted to allow access without fault.
Sets the duration for the buzzer notification when the strike is activated.
Prolongs strike, buzz, and shunt activation if the door remains open.
Determines if the strike deactivates immediately upon physically opening the door.
Disables strike but activates shunt time for Request to Enter events.
Disables strike but activates shunt time for Request to Exit events.
Identifier for the door being programmed, with options 1-8.
Determines if Access Granted and Door Request events are sent to the panel.
Determines if No Entry (Access Denied) events are sent to the panel.
Determines if Request to Enter (RTE) events are sent to the panel for processing.
Determines if Request to Exit (REX) events are sent to the panel for processing.
Supplementary notes related to Event Profile configurations.
Section for recording summary account and customer site information.
Fields to record door, point, text, and location for system configuration.
General| Brand | Bosch |
|---|---|
| Model | D9210C |
| Category | Network Hardware |
| Language | English |
To Next Page
