Need help?Do you have a question about the Bosch FLEXIDOME IP micro 2000 and is the answer not in the manual?
General| Maximum resolution | 640 x 480 pixels |
|---|---|
| Supported video modes | 240p, 480p |
| Video compression formats | H.264, M-JPEG |
| Pan range | 0 - 350 ° |
| White balance | Auto |
| Tilt angle range | 0 - 55 ° |
| Camera shutter type | Electronic |
| Camera shutter speed | 0.00006 s |
| Minimum illumination | 1 lx |
| Sensor type | CMOS |
| Progressive scan | Yes |
| Optical sensor size | 1/4 \ |
| Optical zoom | - x |
| Focus adjustment | 2.8 |
| Fixed focal length | 2.5 mm |
| Security algorithms | 3DES, DES, SSL/TLS |
| Built-in HDD | No |
| Compatible memory cards | MicroSDHC, MicroSDXC |
| Form factor | Dome |
| Product color | White |
| Type | IP security camera |
| PTZ control | - |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| Audio formats supported | AAC |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, SNTP, SNMP (V1, MIB‑II), 802.1x, DNS, DNSv6, DDNS, SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, Digest Authentication |
| Compliance industry standards | 802.3af |
| DC output voltage | +24V, +12V |
| Power source type | PoE |
| Power consumption (typical) | 3.84 W |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Height | 55 mm |
|---|---|
| Weight | 250 g |
| Diameter | 105 mm |
To Previous Page