Bosch FPA-5000 Manual

62 pt-BR | Diagnostics
AVENAR panel 8000 | AVENAR panel 2000 |
AVENAR keypad 8000
2023-08 | 8.0 | F.01U.378.877
Manual do utilizador
Bosch Sicherheitssysteme GmbH
Problemas esperados após o reinício:
The table indicates inconsistencies between the network settings that have already been
configured on the panel but which do not take effect until restart ("saved") and the settings
configured in RPS ("configured").
14.7.3 Ethernet ports
To display a table listing the various parameters and the status of the two Ethernet ports:
1. In the start menu, select Diagnósticos
2. Serviços de rede
3. Portas Ethernet
Information on Ethernet port 1 is displayed.
You can use the arrow key on the display to switch to details of Ethernet port 2, port 3
and port 4.
To update the information displayed, select Actualizar.
Information on the following parameters is displayed in the table:
– Port status
– Link status: Checks the operativeness of the network cable
– Speed: Speed of the network connection
– #Tx Frames: Number of transferred data packages
– #Rx Frames: Number of received data packages
– Connected to: Indicates neighboring available node
14.7.4 Send ping command
To check the availability of other nodes in the network, a ping command can be sent to a
specific IP address:
1. In the start menu, select Diagnósticos
2. Serviços de rede
3. Enviar comando Ping
4. Enter the IP address of the network node you wish to assess as regards availability and
select Enviar comando Ping.
To enter an IP address:
Touch the field containing the IP address. Use the arrow keys on the operating panel to
select the individual numbers and modify using the number keys on the alphanumeric
keypad.
Or:
Touch the Alterar field. Touch the field containing the number block to be changed. Use
the arrow keys on the operating panel to select the desired number and modify using the
number keys on the alphanumeric keypad.
If the addressed network node is accessible, a success message is displayed.
14.7.5 Remote Services
Os Remote Services oferecem uma conexão de Internet remota segura ao AVENAR panel
8000/2000 para integradores de sistemas. Os seguintes recursos estão disponíveis:
– Remote Connect
– Remote Alert
– Remote Interact
– Remote Maintenance
Esses serviços requerem o gateway de rede segura para Remote Services. Para obter
instruções detalhadas sobre como configurar qualquer um dos Remote Services, consulte o
Guia de rede.

Bosch FPA-5000 Specifications

General

Max Number of Detectors per Loop	254
Display	LCD
Network Capability	Yes
Power Supply	24 V DC
Operating Temperature	-5°C to +50°C
Communication Ports	Ethernet
Humidity Range	95% non-condensing