Bosch HPC 400 User Manual

Calling up information about the s ystem
Menu : Consumed energy > Elec. add. heater
Heating
DHW
Pool
Cumulated energy consumed for DHW
heating
Cumulated energy consumed for
swimming pool
Table 40 Information on the energy consumed by the electric
booster heater
Menu : Consumed energy > Compressor
Heating
DHW
Cooling
Pool
Cumulated energy consumed for
heating mode
Cumulated energy consumed for DHW
heating
Cumulated energy consumed for
cooling mode =j
Cumulated energy consumed for
, swimming pool heating _
Table 41
Information on the energy consumed by the
compressor
Menu : Output produced
In this menu . the cumulated outputs from the heat pump are
displayed .
DHWoutput
produced
Cooling output
produced
Pool output
produced
Cumulated output for heating mode
J _
Cumulated output for DHW heating
vUIIIUICllCU output for cooling
Cumulated output for swimming pool
~_ heating ~
Table 42 Information on the total output produced
BOSCH
Menu : Solar
This menu is only available if at least one solar system is
installed . Information is only displayed under the individual
menu items if the corresponding parts of the system are
installed .
Currently measured temperatures with
display of the position of the selected
I
temperature sensor in the solar system
hydraulics (with graphical visualisation of
the current operating conditions of the I
actuators in the solar system)
I
Solar thermal
system
I Solar yield for last week . solar yield for
current week and total yield of solar system
since the solar system was commissioned
This submenu lists information on the set
gross collector area (setting may only be
made by the contractor 7 technical
I
1 documentation for the solar module) and
the operating conditions of the various
pumps in the solar system .
Table 43 Information about the solar system
34 HPC400-6720821983(2017/07)
BOSCH
Calling up information about the system
o eratin the appliance Result
Cal .. Infcw .. tIunIbaut .............
• If the standard display is active . press the info key to
open the info menu .
•
Turn the selector to highlight Solar .
•
Press the selector to open the Solar menu .
m
and press the selector.
ith the lowest number is
• Turn the selector to mark the Solar sensors menu ite
The current temperature at the temperature sensor w
displayed . The number in the graphic indicates the po
in the system. e.g. temperature cylinder 2 bottom [5
sition of the temperature sensor I
J.
• Turn the selector to call up more temperatures .
The graphics in the info menu in the solar system show
valves . When a pump is running the symbol for the pu
in the symbols for mixers or valves indicate the direc
the installed pumps . mixers and
mp ~is rotating . Solid triangles
tion in which the heat transfer
medium is flowing .
.................. ,....
• If the standard display is active . press the info key to
open the info menu .
•
Turn the selector to highlight Solar .
•
Press the selector to open the Solar menu .
•
Turn the selector to highlight Solar yield and press t
The solar yields for the current week are displayed .
he selector .
1
• Turn the selector to switch the display between sola
r yield for the current week . solar
yield for last week and total yield of solar system sin
Table 44 Call up information about the solar system
Menu item : Outside temperature
ce commissioning.
The currently measured outside temperature is displayed in
this menu . In addition. a diagram of the outside temperature
profile for today and yesterday (from 00:00 to 24 : 00 in each
case) is displayed here.
I Solar sensors
>1
Sola r yield
>
~-
>
Solar thermal system
6 720 8111:J6.3a.
10
Cylinder 2 bottom temp .
41 ' C
~
67 20 811136-40. 10
-
Collector temperature
86'C
tl:::8
6 720 811136-39 .1 0
Current week In k.Wh 1/3 t
Mo
13 ,3
Tu
1298
- -
I~ -"-"--
TIl
'-,-
I' . Fr
' -,-
Sa
'-,-
I' Su
I··,·
6720811136-41 . 20
HPC400 - 6 720821983 (2017/07) 35

Bosch HPC 400 Specifications

General

Brand	Bosch
Model	HPC 400
Category	Control Panel
Language	English