Need help?Do you have a question about the Bosch HPC 400 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | HPC 400 |
| Category | Control Panel |
| Language | English |
Explains the meaning of symbols used in the document to enhance understanding and safe operation.
Provides essential safety guidelines for the user of the heating system, emphasizing correct usage and precautions.
Details the scope and capabilities of the user interface based on system configuration and installed components.
Explains how the user interface controls heating/cooling circuits and the available control modes.
States compliance with European Directives and provides information on obtaining the declaration.
Describes system behavior and required actions after a power interruption, including time/date reset.
Guides users on choosing which heating circuit's data is shown on the standard display when multiple circuits are installed.
Explains how to activate automatic or optimized operating modes for efficient heating control based on time programs.
Instructions on temporarily adjusting room temperature in automatic mode or permanently in optimized operation.
Covers additional settings like activating extra DHW and changing DHW heating operating modes.
Explains how to access and configure frequently used functions for heating circuit 1 via the 'fav' key.
Provides a comprehensive overview of all available main menu items and their purposes, with corresponding page references.
Guides users on configuring heating system parameters when operating in automatic mode, linked to time programs.
Details how to set desired temperatures for heating, setback, and cooling modes within the automatic operation.
Explains how to activate and customize time programs for heating circuits, allowing for automated temperature adjustments.
Configures the outdoor temperature threshold for automatic switching between summer and winter operating modes.
Manages how the system alternates between heating and DHW production based on priority and time settings.
Allows prioritization of heating circuit 1, potentially restricting other circuits based on its heat requirements.
Covers various settings for domestic hot water heating, including operating modes and time programs.
Allows selection of DHW heating modes like automatic, always on, or custom time programs.
Enables users to create or modify time programs specifically for domestic hot water heating schedules.
Configures settings for activating immediate domestic hot water heating when the extra DHW function is used.
Sets up periodic heating of DHW to high temperatures to prevent bacterial growth like legionella.
Manages how the system alternates between heating and DHW production based on priority and time settings.
Configures the operation of the DHW circulation pump for faster hot water availability at taps.
Allows configuration of parameters for heating a swimming pool, including temperature and auxiliary heater use.
Manages settings for an auxiliary heater, potentially used when the heat pump cannot meet demand.
Sets a time program for the auxiliary heater to optimize energy consumption during periods of lower demand.
Enables users to set a temporary program for periods of absence, adjusting heating and DHW to save energy.
Configures parameters for systems using multiple heat sources, like heat pumps combined with gas or oil.
Allows the system to utilize energy from the smart grid for heating or DHW production based on availability.
Enables the use of energy generated by a PV system for heating or domestic hot water production.
Covers essential system configurations like language, time format, date, and display contrast.
Configures the heat pump's operation to reduce noise levels during specific hours or based on outdoor temperature.
Displays current operating modes, set room temperature, and actual room/flow temperatures for heating circuits.
Shows required and actual temperatures for domestic hot water, available only if a DHW system is installed.
Displays set point and actual temperatures for a heated swimming pool, if the pool module is installed.
Provides operational statistics for the heat pump, including running hours and number of starts for various functions.
Shows cumulative energy consumption for the heat pump and auxiliary heater, broken down by function.
Displays information about the solar system, including sensor temperatures, solar yield, and system components.
Shows weekly and total solar yield figures, indicating energy generated by the solar system.
Displays the current outside temperature and a profile of temperature changes over the past two days.
Advises on optimizing heating and cooling for energy efficiency, focusing on operation modes and room temperature settings.
Recommends using the time program for DHW heating to ensure hot water availability only when needed, saving energy.
Addresses user queries regarding temperature settings, radiator behavior, pump operation, and heat source management.
Provides guidance on resolving common faults by checking simple causes and applying basic remedies.
Instructs on how to clear fault messages from the display, check causes, and contact a contractor if necessary.
Details the use of environmentally friendly packaging and participation in recycling programs.
Advises on proper disposal of old electrical devices through separate collection and recycling systems.
To Next Page
