EasyManua.ls Logo

Bosch Kiox BUI330 - Advanced Features and Functions; ABS System Information (Optional); The Premium Lock Function

Bosch Kiox BUI330
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English – 21
When switching on the system or inserting the Kiox into the holder, you will
briefly be shown which eSuspension mode is activated. The system is al-
ways started in the mode that was last active.
If you remove the Kiox, when the battery is empty or when you are travelling
on reserve power for the lights, the suspension will be set to the soft mode.
For details of these settings, please refer to the operating instructions
provided by the eSuspension manufacturer.
eSuspension is only available in combination with the Kiox on-board com-
puter and can only be used with the BDU450 CX, BDU480 CX and
BDU490P drive units.
ABS – anti-lock braking system (optional)
If the eBike is fitted with a Bosch eBike ABS, the indicator light is shown in
the display of the on-board computer during the system start-up as well as in
the event of a fault. The indicator light goes out once the eBike is travelling
faster than 6km/h and no fault has been detected by the ABS. If an ABS
fault occurs while riding, the indicator light in the display will warn you that
the ABS is inactive. If you acknowledge the fault, the text <(ABS)> will ap-
pear in place of the state of charge. You can continue to ride, yet will be re-
minded about the inactive status of the ABS.
For detailed information on the ABS and how it works, please refer to the
ABS operating instructions.
Lock (premium function)
The Lock function is available to purchase from the <Shop> in the eBike
Connect app. Once the Lock function has been set up and the Lock has been
activated by removing the on-board computer, the eBike drive unit assist-
ance is deactivated. It can only be activated using the on-board computer as-
sociated with the eBike.
The Lock function is linked to your user account, which you can use to log
into the eBike Connect app. The account allows you to use the Lock func-
tion with an on-board computer, which in turn can be used to activate the
function on up to 4 eBikes.
Note that 2 hours must have passed in between any 2 activations of the Lock
function.
Warning! If you attempt to change a setting in the app, the on-board com-
puter or the portal that could have negative consequences in combination
Bosch eBike Systems 1 270 020 Ken | (25.08.2020)

Table of Contents

Other manuals for Bosch Kiox BUI330

Related product manuals