English – 26
Displays and settings of the on-board
computer
Please note: All screenshots showing the display and text on the following
pages are from the approved software version. The display and/or text may
change slightly following a software update.
Operating logic
You can use the <(10) and >(8) buttons to switch between the different
riding value information pages (even while riding). This way, you can keep
both hands on the handlebars while cycling.
You can use the +(12) and –(11) buttons to increase or decrease the as-
sistance level.
The <Settings> that can be accessed via the Status screen cannot be
changed while riding.
You can use the select button(9) to perform the following functions:
– You can access the quick menu while riding.
– You can access the settings menu from the Status screen while station-
ary.
– You can confirm values and acknowledge informative hints.
– You can exit a dialogue.
If the on-board computer is removed from its holder and not switched off, it
will display information regarding the last journey, as well as status informa-
tion, on a loop.
If no button is pressed after the on-board computer is removed from the
holder, it will switch itself off after 1 minute.
Order of pages
Provided the on-board computer is fitted to the holder, you can view the fol-
lowing displays one after the other:
1. Start page
2. Time and range
3. Distance and journey time
4. Power and cadence
5. Average and maximum speed
6. Distance, range, power and heart rate
Bosch eBike Systems 1 270 020 Ken | (25.08.2020)
To Next Page
Loading...
