Bosch Kiox BUI330 - Status Screen

English – 28
j
Average speed
k
Performance evaluation
A)
Can be changed via the <Settings> status page.
The a…d indicators form the status bar and are shown on every page. If the
speed is already being displayed on the screen itself, the aindicator will
change to the current time in hours and minutes. The status bar displays:
– Speed/time: The current speed in km/h or mph or the current time
– Assistance level: Indicates the current level of assistance using a colour
code
– Light: A symbol that indicates whether the light is on
– eBike battery state of charge: Indicates the current state of charge as a
percentage
The performance evaluationk graphically displays your current speed (white
bar) in comparison to your average speedj. The graphic shows you whether
your current speed is faster or slower than your average speed (left of the
black line = lower than average value; right of the black line = higher than av-
erage value).
The navigation barg indicates which page you are on. Your current page is
highlighted. You can use the <(10) and >(8)buttons to move to additional
pages.
From the initial start page, you can access the status page via the <(10)but-
ton.
Status screen
As well as the status bar, the status
page also shows you the current time
and the state of charge of all your
eBike's batteries, as well as the state
of charge of your smartphone battery
if the smartphone is connected via
Bluetooth®.
It may also display symbols to indic-
ate an activated Bluetooth® function
or a device connected via Bluetooth®
(e.g. a heart-rate monitor). You will
also be shown the date of the most
Bosch eBike Systems 1 270 020 Ken | (25.08.2020)