Bosch KMA 800 - English; Default Chapter; Table of Contents

1 689 989 349 2017-07-01| Robert Bosch GmbH
4 | KMA 802/822 |
1. Symbols used 5
1.1 In the documentation 5
1.1.1 Warning notices -
Structure and meaning 5
1.1.2 Symbols in this documentation 5
1.2 On the product 5
2. User information 5
2.1 Important notes 5
2.2 Safety instructions 5
2.3 Electromagnetic compatibility (EMC) 5
3. Product Description 6
3.1 Intended use 6
3.2 Comparison of the “KMA” and “Glass” measuring
technology 6
3.2.1 Wetting 6
3.2.2 Temperature differences 6
3.2.3 Fluctuations in the injection-pump flow
rate 6
3.3 Scope of delivery 6
3.4 Special accessories 6
3.5 KMA 800 (PC and operator display unit mounted
on the injection pump test bench) 7
3.5.1 PC unit 7
3.5.2 Operator display unit 7
3.6 KMA 822 (trolley with PC and operator display
unit) 7
3.7 KMA 802 (measuring device) 8
4. Initial Commissioning 8
4.1 KMA 800 (PC and operator display unit mounted
on the injection pump test bench) 8
4.1.1 Fitting PC unit 8
4.1.2 Fitting the operator display unit 9
4.1.3 Fitting monitor 9
4.1.4 Connecting the connecting cables 10
4.2 KMA 822 (trolley with PC and operator display
unit) 10
4.2.1 Setting up trolley 10
4.2.2 Fitting keyboard 10
4.2.3 Fitting the PC 10
4.2.4 Connecting the connecting cables 10
4.3 KMA 802 (measuring device) 11
4.4 Electrical connection 11
4.4.1 KMA 800/822 11
4.4.2 KMA 802 (measuring device) 11
4.4.3 Overflow temperature 11
4.4.4 Cable routing 12
4.5 Commissioning 12
4.5.1 KMA 800/822 12
4.5.2 KMA 802 (measuring device) 12
4.5.3 Software settings 13
4.6 Test run 13
4.7 Measuring the overflow rate 13
5. Prevention of
contamination 14
6. Faults 15
6.1 fault memory 15
6.2 Troubleshooting 15
6.3 Cleaning the volume meter 15
6.3.1 Cleaning the volume meter 15
6.3.2 Venting the volume meter 17
7. Maintenance 18
7.1 Maintenance 18
7.2 Maintenance intervals 18
7.3 Cleaning monitor 19
7.4 Spare and wearing parts 19
8. Decommissioning 20
8.1 Temporary shutdown 20
8.2 Change of location 20
8.3 Disposal and scrapping 20
8.3.1 Substances hazardous to water 20
8.3.2 KMA 802/822 and accessories 20
9. Technical data 21
9.1 General data 21
9.2 Dimensions and weights 21
10. Range of adjustment limits
(guaranteed measurement range) 22
en
Contents English