1 689 989 349 2017-07-01| Robert Bosch GmbH
enProduct Description | KMA 802/822 | 7
3.5 KMA 800 (PC and operator display
unit mounted on the injection pump
test bench)
3.5.1 PC unit
Fig. 1: PC unit mounted on the switch cabinet
The PC unit consists of a PC (fig. 1, item 2) and a com-
puter housing (fig. 1, item 1) which is attached to the
electrical cabinet (fig. 1, item 3) of the EPS.
3.5.2 Operator display unit
Fig. 2: The operator display unit is mounted on the cover
The monitor (fig. 2, item 1) provides a display of: user
prompts, REQUIRED-ACTUAL data, measurement re-
sults, error messages, Help information etc. To operate
the KMA and the injection pump test bench, a keyboard
(fig. 2, item 2) is used.
Keyboard (fig. 2, item 2) and monitor (fig. 2, item1) are
pivoted on the EPS cover (fig. 2, item 3).
3.6 KMA 822 (trolley with PC and opera-
tor display unit)
Fig. 3: Trolley with PC, monitor and printer
In this version, the PC (fig. 3, item 5) and the operator-
display unit (monitor (fig. 3, item 1), keyboard (fig. 3,
item 3)) are mounted in a trolley (fig. 3, item 2) which
can also accommodate a printer (fig. 3, item 4) as an
optional accessory.
The trolley (fig. 3, item 2) is positioned at the side of
the EPS.
To Next Page
Loading...
