Why is the picture dark on my Bosch Security Camera?
If the picture from your Bosch Security Camera is dark, verify that the Gain Control is set to High and the Auto Iris Level is appropriately adjusted. Also, make sure the camera lens cover is removed and the maximum Ethernet cable distance is not exceeded. If the issue continues, restore all camera settings.
Why is the image dim on my Bosch Security Camera?
If the image on the screen of your Bosch Security Camera is dim, check if the lens is dirty. If it is, clean the lens with a soft, clean cloth.
Why does my Bosch MIC-7130-PB4 Security Camera have no network connection?
If your Bosch Security Camera has no network connection, verify all network connections are properly established. Ensure that the distance between any two Ethernet connections does not exceed 100 m (328 ft). If you're using a firewall, check that the Video Transmission mode is configured to UDP.
What to do if my Bosch MIC-7130-PB4 Security Camera has no video?
If your Bosch Security Camera shows no video, first, ensure that the main power supply is on. If you have an IP-enabled camera and have a web page, try cycling the camera’s power off and on. If there is no web page, verify the IP address using Configuration Manager. Also, check for 24 V output from the transformer and inspect all wires and connectors leading to the camera for integrity.
How to fix no camera control on Bosch MIC-7130-PB4?
If there is no camera control for your Bosch Security Camera, ensure the LAN cable is securely connected. Refresh the browser and check if the video updates. If the issue persists, try cycling the camera's power off and on.
Why does my Bosch Security Camera move when trying to move other cameras?
If your Bosch Security Camera moves when you attempt to move other cameras, check that the camera’s IP address is properly set. Use the Configuration Manager to confirm that two cameras do not have the same IP address, and if they do, change the address of one of the cameras.
What to do if video is rolling, noisy, or distorted on Bosch Security Camera?
If the video from your Bosch Security Camera is rolling, noisy, or distorted, check the integrity of all connectors and splices of the Ethernet cable.
How to fix weak contrast on Bosch MIC-7130-PB4 Security Camera?
If the contrast on the screen of your Bosch Security Camera is too weak, adjust the contrast feature of the monitor. Also, check if the camera is exposed to strong light; if so, change the camera position.
Why does my Bosch MIC-7130-PB4 Security Camera reboot frequently?
If your Bosch Security Camera reboots frequently or intermittently, test the camera with another power supply.
Why is the image flickering on my Bosch Security Camera?
If the image on the screen of your Bosch Security Camera flickers, check if the camera faces directly into the sun or fluorescent lighting. If so, reposition the camera.
General| Resolution | 1280x720 |
|---|---|
| Lens | 2.8mm |
| Operating Temperature | -10°C to +50°C |
| Power Supply | 12V DC |
| Night Vision | Yes |
| Video Compression | H.264 |
| Weather Resistance | IP66 |
To Next Page
