To Next PageTo Next Page
Need help?Do you have a question about the Bosch MS 200 and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Supply voltage | 24 VDC |
| Operating temperature | -20°C to +60°C |
| Protection Class | IP20 |
| Communication interface | CAN |
| Output Current | 2 A |
| Manufacturer | Bosch Rexroth |
Covers determined use, installation, electrical work, user handover, and frost protection.
Instructions for mounting the module on a wall or rail.
Guidelines for power connections and cable types.
Details on connecting BUS nodes and temperature sensors.
Instructions for connecting power supply, pumps, and mixers to mains voltage.
How to set the coding switch for system configuration and indicator lights.
Steps for commissioning solar, transfer, and primary store systems.
Process for selecting and adding functions to the solar system configuration.
Detailed settings for solar circuit, pumps, collector temperatures, and special functions.
Enables system startup after parameter checks and filling/venting.
Allows testing of pumps, mixers, and valves by adjusting settings.
General advice on using spare parts, contacting service, and resetting settings.
Table correlating status indicators with possible causes and remedies.
