Need help?Do you have a question about the Bosch ACC MT and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Manufacturer | Bosch |
| Name | ACC MT |
| Number of Outputs | 4 |
| Communication Interface | CAN |
| Current Consumption | 100 mA |
Explains warning symbols and signal words used in the manual.
Covers target user group, intended product use, and regulatory compliance.
Procedures and precautions for electrical installations by qualified personnel.
Lists locations to avoid for installation to prevent fire hazards.
Proper methods for cleaning the touchscreen to avoid damage.
Overview of the Air Center Control, its purpose, and capabilities.
Schematic illustrating VRF system components and controller connections.
Lists compatible indoor/outdoor units and accessories for the controller.
Details all items included in the central controller package.
Explanation of the LED status lights indicating operational or fault status.
Provides the physical measurements of the central controller.
General overview of ports and controls on the device.
Details on ports located on the back without an expansion board.
Procedure to reset the controller to its factory default configurations.
Details on ports on the back when an expansion board is installed.
Details on ports visible when the cover is removed from the top.
Details on ports located on the right side of the controller.
Instructions on how to connect the power source to the controller.
Specific connection steps for the mains power supply unit.
Detailed technical parameters, ratings, and specifications of the controller.
Steps required before commencing physical installation, including site selection.
Instructions on how to install and use the optional cable feed insert.
Guide for installing the AC EXP expansion card into the controller.
Details on required cable types, lengths, and connection precautions.
Overview of the two methods for attaching the controller to a wall.
Step-by-step guide for mounting on walls without using a cable conduit.
Step-by-step guide for mounting on walls using a cable conduit.
Procedure for securing the controller to the wall mounting bracket.
Instructions on how to safely detach the controller from its mounting.
General steps to follow for commissioning the system components.
Step-by-step instructions for the initial setup wizard.
Suggested settings to configure after the initial wizard completes.
Explanation of the main dashboard screen elements and navigation.
Guidelines for explaining system functions and settings to the customer.
Accessing help information and navigating the main menu items.
Information on environmentally compatible packaging and recycling.
Guidance on proper disposal of used electrical and electronic equipment.
Details on open source software used and where to find information.
Information on protecting customer data and user responsibilities.
To Next Page