EasyManua.ls Logo

Bosch ACC MT - Technical Data and Specifications

Bosch ACC MT
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Product Information
13
Air Center Control – 6720892132 (2021/10)
2.7 Technical data
The PoE+ (Power over Ethernet) function is not available for
devices with the part number 8733502082.
Table 3 Technical data
Device designation Air Center Control ACC MT
Construction Electronic, separately installed controller for surface installation
Weight 1590 g
1820 g (Part number 8733502082)
Dimensions 271 × 188 × 42 mm
Power supply 24 V DC 1A or PoE+ and 24 W (802.3at)
Electricity consumption Max. 24 W, typical 10.2 W
Display 10.1" WXGA (1200 × 800) with PCAP-Touch
Connections, basic device USB (Type A, max. 500 mA, max. 32 GB, FAT 32)
LAN (100 Mbit/s)
1×XYE
2×Digital In (24VDC, max. 15mA)
2 × Digital Out (Dry-Contact, max. 24 V AC/DC, continuously
max. 250mA (max. 2A peak))
1 × micro SD card
Connections for expansion card 1×LAN (100Mbit/s)
3×XYE
1×ModBus/RTU (max. 115kbit/s)
1×Analogue In (0...10V)
1×Analogue Out (0/4...20mA)
Protection index IP30
Ambient conditions, operation 0...40 °C, 5...85 % RH, pollution degree 2
Ambient conditions, transport –30...70 °C, 5...95 % RH
Ambient conditions, storage –25...55 °C, 5...95 % RH
SELV voltage Max. 57 V DC
Rated impulse voltage DC
in
, PoE+:1500 V; other connections: 500 V
Operating principle according to IEC/EN 60730-1 Type 1
Software class according to IEC/EN 60730-1 A
Specified voltage and specified current for the purpose of EMC
interference tests
24 V/0,7 A

Related product manuals