Need help?Do you have a question about the Bosch AMC-4W and is the answer not in the manual?
General| Series | AMC |
|---|---|
| Model | AMC-4W |
| Input Voltage | 24 VDC |
| Number of Digital Inputs | 8 |
| Number of Digital Outputs | 8 |
| Mounting | DIN Rail |
| Number of Slots | 4 |
| Product Type | Controller |
| Manufacturer | Bosch |
| Operating Temperature | 55 °C |
| Communication Interface | Ethernet, CAN |
General safety guidelines, warnings, and crucial precautions for proper operation and installation.
Specific warnings regarding electrical hazards, equipment damage, and adherence to regulations.
Instructions for attaching and detaching the AMC-4W unit to a standard mounting rail.
Procedures for proper grounding and shielding of system components to protect against shock hazards.
Detailed instructions for connecting power supplies for internal electronics and peripherals.
Information on configuring and connecting the AMC-4W to an RS485 host system.
Specific wiring instructions for establishing an RS485 two-wire communication link.
Specific wiring instructions for establishing an RS485 four-wire communication link.
Guide to setting the RS485 address, protocol, and host connection via DIL switches.
Instructions for connecting Wiegand-compatible card readers to the AMC-4W.
Guide to connecting and configuring the eight form C relay outputs in wet or dry mode.
How to use analog inputs for detecting lock status and wiring conditions like short circuits.
To Next Page