Bosch AMC-4W - Technical Data; Hardware and System Specifications; Power Supply and Display Details

Technical Data Access Controller AMC-4W
18 Installation Guide Bosch Security Systems | V.3.1/2006-09
4. Technical Data
Hardware - Integrated Microcontroller (16Bit, 20MHz)
- FLASH (256kB)
- SRAM (256kB)
- Serial EEPROM
- RTC
- Pluggable Compact Flash from 64 MB up to
1024 MB
- Battery for SRAM and real time clock (RTC)
- Host address selectable via DIL sliding switch or
software
- Host interface
RS485 2-wire or 4-wire
Transfer rate: 38,4 kBit/s
(No parity, 8 Bit, 1 Stop bit)
RS232 (No parity, 8 Bit, 1 Stop bit),
Ethernet
- Wiegand interface for card readers
- Eight relay outputs using resistive load
Maximum switching power: 37,5VA
Maximum switching voltage: 30V AC/DC
Maximum switching current: 1,25A
- 8 analog inputs with sabotage monitoring
Tamper contact for enclosures
Power supply Electronics: 10V – 35V DC
Peripheral devices: 12V
Display - 64,8 mm x 13,9 mm
- 1 line, 16 characters
Power consumption Internal: 3,1 VA
Peripheral devices
Deutronic: Up to 56VA at 12V DC
Altronix: Up to 66 VA at 12V DC
Connectors Pluggable screw connectors