Installing the AMC-4W Access Controller AMC-4W
40 Installation Guide Bosch Security Systems | V.3.1/2006-09
Figure 28: Location of the analog input connectors
5.13. Tamper Protection
To protect the AMC-4W against unauthorized access and prevent the AMC-4W
from tampering with sensitive data, the AMC-4W offers an additional interface
to connect external tamper contacts. This interface is a potential-free 2-pin
pluggable screw connector marked with T. If not using the tamper contact,
short-circuit the contacts with a wire connection.
Figure 29: Location of the tamper protection contact
To Next Page
Loading...
