Need help?Do you have a question about the Bosch APC-AMC2-4WCF and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | APC-AMC2-4WCF |
| Category | Controller |
| Language | English |
Essential safety guidelines and operational precautions for the AMC2 device.
Device compliance with Federal Communications Commission (FCC) and ICES regulations.
Critical safety warnings regarding electric shock, fire, and lithium battery handling.
Instructions for safely unpacking the AMC2 device and checking for transport damage.
Definition and meaning of symbols used throughout the AMC2 manual.
Details on accessing further product information via the Bosch website.
Overview of the AMC2-4W controller's features, interfaces, and primary functions.
Identification and explanation of components on the AMC2-4W circuit board.
Key technical specifications and operational capabilities of the AMC2-4W.
Diagram illustrating the AMC2-4W's integration into a typical access control system.
Procedure for mounting the AMC2-4W onto a standard 35 mm DIN rail.
Steps to safely remove the AMC2-4W from its mounting rail.
Guide on how to open the AMC2-4W enclosure for internal access.
Instructions for correctly reassembling the AMC2-4W enclosure.
Recommendations for routing cables to prevent electrical interference.
Calculations for selecting appropriate conductors for power supply connections.
Methods for proper grounding and shielding to ensure system integrity.
Specific grounding procedure for the extension interface using jumpers.
Detailed instructions for connecting the external power supply unit to the AMC2-4W.
Connecting the AMC2-4W to a network via its Ethernet port.
Connecting expansion modules via the RS-485 extension module bus.
Connecting Wiegand readers to the AMC2-4W's four dedicated interface ports.
Connecting external devices like locks or alarms to the AMC2-4W's eight relay outputs.
Connecting analog devices for monitoring lock status to the AMC2-4W.
Connecting external tamper contacts to detect unauthorized enclosure access.
Hardware and software specifications for UL-compliant AMC2-4W installations.
Explanation of the UL 294 standard's security level classifications.
Specific installation directives and restrictions for UL certified configurations.
Interpreting status information on the AMC2's liquid crystal display.
Steps for configuring the AMC2-4W's network settings using the AmclpConfig tool.
Procedure to reset the AMC2-4W application software to its default state.
Steps to perform a full factory reset of the AMC2-4W device and its settings.
Visual diagrams of connector pinouts and interface connections for the AMC2-4W.
To Next Page