Avoiding material damage en
19
▶ Do not reach into the bowl when lowering the swivel arm.
▶ Keep packaging material away from children.
▶ Do not let children play with packaging material.
▶ Keep small parts away from children.
▶ Do not let children play with small parts.
▶ Follow the cleaning instructions.
▶ Clean surfaces which come in contact with food before each
use.
Avoiding material damage
Avoiding material damage
Avoiding material damage
▶ Never use different drives at the same
time.
▶ Never operate the appliance longer than
necessary.
▶ Do not operate the appliance at no-load.
▶ Never use genuine parts and accessor-
ies for other appliances.
▶ Do not exceed maximum processing
quantities.
▶ Before use, check the bowl for foreign
objects and remove.
▶ Set up the appliance at a sufficient dis-
tance from walls, easily damaged sur-
faces and other appliances.
Familiarising yourself with your appliance
Familiarising yourself with
your appliance
Familiarising yourself with your appliance
Overview
After unpacking all parts, check for any
damage in transit and completeness of the
delivery.
→Fig. 1
Mixing bowl
Lid with integrated filling shaft
Release button for swivel arm
Swivel arm
Rotary switch
Protective cover for drive 2
Drive 2
Protective cover for drive 3
Drive 3
Vent grille
Main drive
Cord storage
Recess for bowl
Kneading hook
Beating whisk
Stirring whisk
Rotary switch
Symbol Function
Stop processing.
Process ingredients at low
speed.
Process ingredients at max-
imum speed.
Non-locking switch: highest
speed as long as the rotary
switch is held in this position
Tip:You can change the speed at any time
during processing or interrupt processing.
Swivel arm, drives and recommended
speeds
If the release button is pressed, the swivel
arm can be moved to the required position.
The swivel arm must be engaged inevery
operating position.
Observe the recommended speeds in the
table.
→Fig. 2
To Next Page
Loading...
