Disposing of old appliance en
23
Fault Cause and troubleshooting
Appliance does not start
processing or switches
off during processing.
Swivel arm is not engaged properly or has become de-
tached.
1.
Set the rotary switch to .
2. Move the swivel arm until it engages correctly.
The swivel arm cannot
be opened or closed be-
cause the tool is jammed
in the bowl.
Drive is not in the parked position.
1.
Set the rotary switch to .
2. If the swivel arm doesn't close, remove the tool.
3. Close the swivel arm until it is correctly engaged in the
work position.
4.
Set the rotary switch briefly to and then back to .
a The drive remains on for a short time until the parked po-
sition is reached.
Disposing of old appliance
Disposing of old appliance
Disposing of old appliance
1. Unplug the appliance from the mains.
2. Cut through the power cord.
3. Dispose of the appliance in an environ-
mentally friendly manner.
Information about current disposal meth-
ods are available from your specialist
dealer or local authority.
This appliance is labelled in
accordance with European
Directive 2012/19/EU con-
cerning used electrical and
electronic appliances (waste
electrical and electronic
equipment - WEEE).
The guideline determines
the framework for the return
and recycling of used appli-
ances as applicable
throughout the EU.
Customer Service
Customer Service
Customer Service
Detailed information on the warranty period
and terms of warranty in your country is
available from our after-sales service, your
retailer or on our website.
The contact details for Customer Service
can be found in the enclosed Customer
Service directory or on our website.
To Next Page
Loading...
