Bosch NBE-5702-AL - Page 23

DINION 5100i IR Configuration | en 23
Bosch Security Systems B.V.
User manual
2023-08 | V01 | F.01U.393.997
Logo stamping
– Enable
Check this box to enable Logo stamping.
– Position (XY)
This parameter becomes visible if Logo stamping is enabled.
Insert the values for the X and Y coordinates to specify the logo's position.
– Transparent background
Enable this option to hide the logo's background.
– Logo
To place a logo on the image, select and upload an uncompressed .bmp file with a maximum
size of 128x128 pixels and 256 colors to the camera.
Time stamping
– Position
Select the position of the camera name overlay in the drop-down box. It can be displayed at
the Top, at the Bottom, or at a position of choice using the Custom option, or it can be set to
Off for no overlay information.
If the Custom option is selected, enter values in the X and Y position fields.
– Stamping size
Select the desired font size of the overlays on the OSD: Normal, Large or Custom.
Select Custom to enable the Font size (‰) field.
– Text color
Select the color for the alarm message to be displayed in.
– Background color
Select the background color for the alarm message to be displayed in.
If you have enabled the Transparent background option, the background color is not
displayed in the OSD.
Alarm mode stamping
– Position
Select the position of the camera name overlay in the drop-down box. It can be displayed at
the Top, at the Bottom, or at a position of choice using the Custom option, or it can be set to
Off for no overlay information.
If the Custom option is selected, enter values in the X and Y position fields.
– Stamping size
Select the desired font size of the overlays on the OSD: Normal, Large or Custom.
Select Custom to enable the Font size (‰) field.
– Alarm message
Enter the message to be displayed on the image in the event of an alarm. The maximum text
length is 32characters.
– Text color
Select the color for the alarm message to be displayed in.
– Background color
Select the background color for the alarm message to be displayed in.
If you have enabled the Transparent background option, the background color is not
displayed in the OSD.