28 en | Configuration DINION 5100i IR
2023-08 | V01 | F.01U.393.997
User manual
Bosch Security Systems B.V.
Sports and gaming
This mode is for high-speed capture, and improved color rendition and sharpness.
Retail
This mode has improved color rendition and sharpness with reduced bandwidth requirements.
Mode ID
The name of the selected mode is displayed.
Copy mode to
Select the mode from the drop-down menu to which you wish to copy the active mode.
Restore Mode Defaults
Click Restore Mode Defaults to restore the factory default modes.
4.4.5 Color
Brightness (0...255)
Adjust the brightness with the slider from 0 to 255.
Contrast (0...255)
Adjust the contrast with the slider from 0 to 255.
Saturation (0...255)
Adjust the color saturation with the slider from 0 to 255.
White balance
Select the appropriate white balance mode from the drop-down list.
– Basic auto mode allows the device to continually adjust for optimal color reproduction
using an average reflectance method. This is useful indoor light sources and for colored
LED light illumination.
– Standard auto mode allows the device to continually adjust for optimal color
reproduction in an environment with natural light sources.
– Sodium lamp auto mode allows the device to continually adjust for optimal color
reproduction in an environment with sodium vapor light sources (street lighting).
– In Manual RGB mode the Red, Green, and Blue gain can be manually set to a desired
position.
Apply white balance
Click Hold to put ATW on hold and save the current color settings. The mode changes to
manual.
The table below identifies the options available in the field White balance and the additional
fields that appear depending on the options selected.
Option in field “White
balance”
Additional fields for
configuration
NOTES
Basic auto The three fields R-gain, G-gain, and B-
gain only appear when the hold button
is pushed.
Standard auto
Sodium lamp auto
Manual RGB R-gain
G-gain
B-gain
4.4.6 ALC
ALC mode
To Next Page
Loading...
