Bosch Diniop IP - NWC-0455 User Manual

Dinion IP - NWC-0455
Installation Manual
IP Camera
EN

Bosch Diniop IP - NWC-0455 Specifications

General

Category	Security Camera
Type	IP Camera
Focal Length	2.8 mm
Lens	Fixed
Night Vision	Yes
Weather Resistance	Yes
Ingress Protection	IP66
Connectivity	Ethernet
Motion Detection	Yes
Audio	No
Model	Diniop IP - NWC-0455
Image Sensor	CMOS
Power Supply	PoE (Power over Ethernet)
Storage	MicroSD card

Summary

Safety Precautions

Danger and Warning Symbols

Explanation of danger and warning symbols used in the manual regarding electrical hazards and operating instructions.

Important Safeguards

A list of essential safety instructions to follow during installation and use.

Connections

Power Connection

Instructions and cautions for connecting the camera's power supply.

Network and PoE Connection

Details on connecting the camera to a network and using Power-over-Ethernet.

Quick Set-Up

Back Focus Adjustment

Procedure to adjust the camera's back focus for optimal sharpness.

IP Address and Network Configuration

Steps to configure the camera's IP address, subnet mask, and gateway.

Network Connection

Establishing Network Connection

Steps to connect the camera to the network via a web browser.

Camera Password Protection

Setting up user names and passwords for access control.

Operation via Browser

Livepage Display and Image Selection

Initial view showing live video, controls, and how to switch between image streams.

Controlling Video Playback

Playback Navigation and Bookmarks

Configuration via Browser

Accessing Configuration Settings

Password Protection and User Levels

Setting up user names, passwords, and authorization levels for access control.

Encoder Settings Overview

Introduction to encoder settings for video compression and streaming.

Selecting Encoder Profiles

Changing Encoder Profiles

Camera Settings: ALC, Enhance, Color

Recording and Storage Configuration

Setting up storage media (RAM, iSCSI) and recording parameters.

iSCSI Settings and Scan

Configuring connection parameters for iSCSI storage devices and scanning for servers.

iSCSI LUN Map and Target Details

Partitioning Storage Device

Setting up partitions on the storage device for recording.

Creating and Editing Partitions

Recording Scheduler

Setting up scheduled continuous or alarm-based recording times.

Activating Recording Partitions

Continuous Recording Schedule

Alarm Recording Schedule

Recording Properties and Alarm Activation

Alarm Input Configuration

Alarm Connection Settings

Setting up how the camera responds to alarms, including IP connections.

Video Content Analysis Setup

Configuring integrated VCA features like analysis activation and types.

Motion Detector Configuration

Configuring motion detection parameters, sensitivity, and conditions.

Tamper Detection Settings

Configuring features to detect tampering with the camera or cables.

Alarm E-mail Configuration

Configuring the camera to send alarm notifications via email.

Service Settings Overview

Network Configuration

Configuring IP address, subnet mask, gateway, and HTTP port.

Version Information and Livepage Customization

Firmware and Configuration Upload

Updating camera firmware and uploading/downloading configuration data.

Firmware Update Procedure

Step-by-step guide for updating the camera's firmware.

Function Test and Verification

Maintenance

Network Connection Testing

Repairs and Disposal Guidelines

Safety warnings for repairs and guidelines for transferring and disposing of the unit.

Troubleshooting

Common Malfunctions and Solutions

A guide to identifying and resolving common camera malfunctions.

Firmware Upload Troubleshooting

Specific troubleshooting steps for firmware upload failures.

Specifications

Type Number and Basic Specifications