EN | 88
Bosch Security Systems | 2006-05 | V2.0
Dinion IP | Installation Manual
Specifications 11
Type number NWC-0495-10P NWC-0495-20P
Standard PAL NTSC
Active pixels 752x582 768x492
Rated supply voltage 24 VAC or 12 VDC or Power-over-Ethernet (IEEE 802.3af)
12-28 VAC (50/60 Hz)
11-3 6 V D C
Min illumination < 0.4 lux
< 0.15 lux (in monochrome mode)
Imager Interline CCD
Resolution 540 TVL (BNC)
SNR > 50 dB
Video output 1 Vpp, 75 Ohm
Synchronization Internal or Line Lock selectable
Shutter AES (1/60 (1/50) to 1/100000), Flickerless, Fixed selectable
Sens Up Adjustable from OFF to 10x
Auto black On, Off selectable (maximum level selectable up to 28dB)
BLC BLC On or Off selectable
White balance Automatic 2500 - 9000K (with AWB hold mode and manual
mode)
Color saturation Adjustable from monochrome (0%) to 133% color
Lens Mount CS compatible, C-mount compatible with supplied adapter ring
ALC lens Video or DC iris auto detect
Power consumption < 8 W
Dimensions 59 x 67 x 122 mm (2.28 x 2.6 x 4.8 inch) without lens (HxWxL)
Weight 450g (0.99 lbs) without lens
Tripod Mount Bottom (isolated) and Top ¼" 20 UNC
Operating
temperature
0° to 40° C (32° to 104° F)
Controls OSD with softkey operation
LAN interface 1 × Ethernet 10/100 Base-T, automatic adaptation, half/full duplex,
RJ-45
Video encoding
protocols
MPEG-4, JPEG
Video data rate 9,600 KBit/s ... 10 MBit/s
To Next Page
Loading...
