EN | 55
Bosch Security Systems | 2006-05 | V2.0
Dinion IP | Installation Manual
Saving changes
After you have made all necessary settings, you must transfer the settings to the
unit and save them. To do this, you need to quit the help in the last window using
the Finish button.
Caution
All modifications to settings are only effective if you complete the
configuration in the last window by clicking Finish.
• Switch to the last window if necessary.
• Click Finish to complete the configuration. All settings are now transferred to
the unit and subsequently become effective.
Editing a partition
You can modify the configuration of a partition at any time.
To Next Page
Loading...
