EN | 13
Bosch Security Systems | 2006-05 | V2.0
Dinion IP | Installation Manual
• Computer with Windows 2000/XP operating system, network access and
reception software, for example VIDOS or DIBOS 8.0
or
• MPEG-4 compatible hardware decoder from Bosch Security Systems (such as
VIP XD) as a receiver and a connected video monitor
The minimum PC requirements are:
• Operating platform: A PC running Windows 2000 or Windows XP with IE6.0
• Processor: 1.8 GHz Pentium IV
• RAM memory: 256 MB
• Video system: 128 MB video memory, 1024x768 display with 24-bit color
• Network interface: 100-BaseT
• DirectX: 9.0b
Note
Make sure the graphics card is set to 16-bit or 32-bit color depth and that
Microsoft Virtual Machine or Java Virtual Machine is installed on your
PC. To play back live video images, an appropriate MPEG ActiveX must
be installed on the computer. If necessary, install the required software and
controls from the product CD provided. If you need further assistance,
contact your PC system administrator.
Overview of functions
The camera incorporates a network video server. Its primary function is to
encode video and control data for transmission over an IP network. With its
MPEG-4 encoding it is ideally suited for IP communication and for remote
access to digital video recorders and multiplexers. The use of existing networks
means that integration with CCTV systems or local networks can be achieved
quickly and easily. Video images from a single camera can be simultaneously
received on several receivers.
To Next Page
Loading...
