EN | 70
Bosch Security Systems | 2006-05 | V2.0
Dinion IP | Installation Manual
• If necessary, click Select all to select the entire video frame for monitoring.
• Right-click any fields you wish to deactivate.
• Click OK to save the configuration.
• Click the close button (X) in the window title bar to close the window without
saving the changes.
Alarm e-mail
As an alternative to automatic connecting, alarm states can also be documented
by e-mail. In this way it is possible to notify a recipient who does not have a
video receiver. In this case the NWC-0495 automatically sends an e-mail to a
user defined e-mail address.
Send alarm e-mail
Select On if you want the unit to automatically send an alarm e-mail in the event
of an alarm.
Mail server IP address
Enter the IP address of a mail server that operates on the SMTP standard (Simple
Mail Transfer Protocol). Outgoing e-mails are sent to the mail server via the
address you entered. Otherwise leave the box blank (0.0.0.0).
Layout
You can select the data format of the alarm message.
To Next Page
Loading...
