Bosch NDP-4502-Z12 - Searching Recorded Video

AUTODOME IP 4000i Preparing the Camera | en 13
Bosch Security Systems Installation Manual 2017.08 | 1.0 | F.01U.xxx.xxx
6 Preparing the Camera
Note: For pendant models, use T15.
For in-ceiling models, use T10.
1. Loosen the three (3) Hex screws in the trim ring / bubble enclosure with the appropriate
Torx screwdriver.
2. Remove the trim ring / bubble enclosure.
2.
1.
3×
T15