24 en | Installing an In-Ceiling Camera in a Drywall Ceiling AUTODOME IP 4000i
2017.08 | 1.0 | F.01U.xxx.xxx Installation Manual Bosch Security Systems
10 Installing an In-Ceiling Camera in a Drywall Ceiling
10.1 Tools Required
– Appropriate screwdriver (Phillips head)
– Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable)
10.2 Installation Requirements
– The ceiling thickness ranges from 10 - 40 mm.
– The ceiling can sustain at least eight (8) times the weight of the camera (1.81 kg (4 lb)): >
14.5 kg (32 lb).
10.3 Preparing the Ceiling for Installation
1. Use the template to mark the hole in the ceiling for the camera.
2. Cut the hole in the ceiling with a drywall utility saw or jig saw.
To Next Page
Loading...
