Bosch NDP-4502-Z12 - Securing the Camera to the Ceiling

AUTODOME IP 4000i Installing an In-ceiling Camera in a Suspended Ceiling | en 21
Bosch Security Systems Installation Manual 2017.08 | 1.0 | F.01U.xxx.xxx
Figure9.2: Cut Hole in Ceiling Tile
2. Tighten the four (4) securing screws to the Bracket Assembly.
Figure9.3: Tighten Bracket Securing Screw
3. Secure the Bracket Assembly to an overhead securing point with a safety wire.
Figure9.4: Secure Bracket Assembly
9.4 Securing the Camera to the Ceiling
1. Connect the cables from the ceiling to the cables on the camera. Refer to the chapter
Connection for more information.