Bosch NDP-4502-Z12 - Page 18

18 en | Installing a Surface Mount and Camera AUTODOME IP 4000i
2017.08 | 1.0 | F.01U.xxx.xxx Installation Manual Bosch Security Systems
5. Attach conduit to the side of the adapter from which you removed the plug (the side from
which the external cables are to be routed).
Note: The conduit should have M20 or NPT ¾ inch threads.
M20 or NPT 3/4"
4×
4×
1. Route the external cables (24 VAC, CAT 5/CAT6, alarm and/or audio as needed) through
the conduit and into the surface mount adapter.
2. Attach the mounting plate (supplied with the camera) to the surface mount adapter with
the three (3) M4 – .7 x 8 Phillips pan head machine screws (supplied with the surface
mount adapter).