Bosch PRM-UST - Product Function; FM Tuner

Product function | en 13
Bosch Security Systems B.V.
User manual
06.2022 | V01 | F01U397942
4 Product function
4.1 FM Tuner
The FM tuner supports the frequency band of 87.5 to 108.0MHz.
Operation
– Connect the antenna
– To scan the radio channels, press the button from the device or remote. Long press
and to fine tune the frequencies. The display panel shows the frequency. During
power on, the last played FM channel starts playing.
– Press to select the previous channel or to select the next channel.
– To play a specific frequency, enter the number from the device or remote. For example,
when you enter 1023, the 102.3MHz frequency will be played. Any number entered
outside FM frequency band will be ignored.
– To store a specific frequency as preset channel (favorite):
– Enter three or four digits of the frequency from the device or remote. For example,
when you enter 1023, the display will show 102.3MHz.
– Press the store button .
– Enter a number from 1 to 30 in which the radio channel is going to be saved as a
favorite. Any number outside this range will be ignored.
– Press the store button again .
– Press RDS (Radio Data System) to enable the functions of the radio data system: