To Next PageTo Next Page
Need help?Do you have a question about the Bosch Professional GLM 50-23 G and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | Professional GLM 50-23 G |
| Category | Measuring Instruments |
| Language | English |
Read and observe all instructions for safe operation and to prevent injury.
Do not direct laser at persons/animals; avoid staring into beam; use laser goggles for visibility only.
Purpose of the tool for measuring distances, lengths, heights, areas, and volumes.
Identifies numbered parts and components of the measuring tool.
Explains various indicators and information shown on the tool's display.
Provides detailed technical specifications for measurements and operating conditions.
Details operating temperature, humidity, altitude, pollution degree, and laser class.
Details laser type, divergence, automatic switch-off, dimensions, and protection rating.
Configure units, display language, access device info, and perform factory reset.
Instructions for inserting/changing batteries and understanding battery status indicators.
Resets the measuring tool to its original factory settings.
Guidance on switching the tool on/off, laser activation, and initial language setup.
General handling precautions regarding temperature, moisture, sunlight, and impacts.
Steps for starting measurements and selecting reference points for accurate readings.
Navigating the settings menu and assigning functions to the favorites button.
Assigning preferred functions or settings to the favorites button for quick access.
Control sound, display brightness, and enable battery saver mode for extended runtime.
Accessing function-specific help and performing basic length measurements.
Using continuous measurement for real-time updates and calculating areas.
Performing measurements to calculate the volume of objects.
Measuring distances or heights indirectly when direct measurement is not possible.
Measuring lengths indirectly and calculating total wall areas.
Transferring lengths onto surfaces for construction or marking.
Measuring slopes or inclines and checking horizontal/vertical alignment.
Viewing saved measurements, deleting individual or all memory values.
Performing addition and subtraction operations on measured results.
Tips on handling, influences on range, and factors affecting measurement accuracy.
Verifying measurement accuracy and calibrating the tool.
Guidance on using optional tripod and belt clip accessories.
Guidelines for keeping the measuring tool clean and in good working order.
Information on obtaining repairs, spare parts, and customer support.
