About this documentation 5/60
RE 92703-01-B/04.2018, A10VO, A10VSO, A10VNO, A10VSNO Series 52 and 53, Bosch Rexroth AG
1 About this documentation
1.1 Validity of the documentation
This documentation applies to the following products:
• Axial piston variable pump A10VO (Series 52 and 53)
• Axial piston variable pump A10VSO (Series 52)
• Axial piston variable pump A10VNO (Series 52 and 53)
• Axial piston variable pump A10VSNO (Series 52)
This documentation is intended for machine/system manufacturers, assemblers and
service engineers.
It contains important information on the safe and appropriate transport, installation,
commissioning, operation, maintenance, removal and simple troubleshooting of the
axial piston unit.
▶ Read this documentation completely, in particular chapter2 “Safety instructions”
on page8 and chapter3 “General notices regarding property and product
damage” on page14 before you start work with the axial piston unit.
1.2 Required and supplementary documentation
▶ Only commission the axial piston unit if the documentation marked with the book
symbol
is available to you and you have understood and observed it.
Table 1: Required and supplementary documentation
Title Document number Document type
Order confirmation
Contains the order-based technical data of your axial piston variable pump
A10VO, A10VSO, A10VNO and A10VSNO.
– Order confirmation
Installation drawing
Contains the outer dimensions, all connections and the hydraulic circuit diagram
for your axial piston variable pump A10VO, A10VSO, A10VNO and A10VSNO.
Please request the
installation drawing
from your contact at
Bosch Rexroth.
Installation drawing
Axial piston variable pump A10VO (Series 52 and 53), sizes 18 to 100
Contains the permissible technical data.
92703 Data sheet
Axial piston variable pump A10VSO (Series 52), size 10
Contains the permissible technical data.
92703 Data sheet
Axial piston variable pump A10VNO (Series 52 and 53), sizes 28 to 85
Contains the permissible technical data.
92735 Data sheet
Axial piston variable pump A10VSNO (Series 52), size 15
Contains the permissible technical data.
92741 Data sheet
Hydraulic fluids based on mineral oils and related hydrocarbons
Describes the requirements on a hydraulic fluid based on mineral oil and related
hydrocarbons for operation with Rexroth hydraulic components, and assists you in
selecting a hydraulic fluid for your system.
90220 Data sheet
Environmentally acceptable hydraulic fluids
Describes the requirements on an environmentally acceptable hydraulic fluid
for operation with Rexroth hydraulic components and assists you in selecting a
hydraulic fluid for your hydraulic system.
90221 Data sheet
Information on the use of hydrostatic drives at low temperatures
Contains additional information on the use of Rexroth axial piston units at low
temperatures.
90300-03-B Manual
To Next Page
Loading...
Need help?
General
