Disposal 51/60
RE 92703-01-B/04.2018, A10VO, A10VSO, A10VNO, A10VSNO Series 52 and 53, Bosch Rexroth AG
12 Disposal
Careless disposal of the axial piston unit, the hydraulic fluid and the packaging
material can result in environmental pollution.
Observe the following when disposing of the axial piston unit:
1. Completely drain the axial piston unit.
2. Dispose of the axial piston unit and packaging material in accordance with the
regulations in your country.
3. Dispose of the hydraulic fluid in accordance with the regulations of your country.
Also observe the applicable safety data sheet for the hydraulic fluid.
4. Disassemble the axial piston unit into its constituent parts for proper recycling.
5. For example, separatethe parts into:
– Castings
– Steel
– Aluminum
– Non-ferrous metal
– Electronic waste
– Plastic
– Seals
13 Extension and conversion
Do not convert the axial piston unit. This is also including a modification of the
setting screws.
Changes to settings on the customer side should only be made using the product-
specific setting instructions.
The warranty from Bosch Rexroth only applies to the product as delivered.
The warranty will be voided if the unit is modified or extended.
Adjusting the setting screws will render the warranty void. If you need to change
the settings, please contact your local contact person; you can find their contact
information under www.boschrexroth.com/adresses
To Next Page
Loading...
Need help?
General
