Bosch rexroth CytroBox - Page 40

40/128 Product information
Bosch Rexroth AG, CytroBox, RE 51057-B/11.19
Table 36: List of parameters
Function Parameter Description
Sensor evaluation
Oil temperature
P-0-1279 Actual value
Page 27
Threshold value
P-0-1389[25] Warning too low
P-0-1389[26] Warning too high
P-0-1389[27] Error too low
P-0-1389[28] Error too high
Oil level
P-0-1291 Actual value
Standardization
P-0-1311[160] Min.
P-0-1311[161] Max.
P-0-1311[162] Min.
P-0-1311[163] Max.
Threshold value
P-0-1389[71] Min.
P-0-1389[72] Max.
P-0-1389[73] Min.
P-0-1389[74] Max.
Leakage flow P-0-1293 Actual value
Page 28
Leakage
temperature
P-0-1294 Actual value
Threshold value
P-0-1389[39] Warning
P-0-1389[40] Error
Dissolved air
inclusion
P-0-1270 Actual value
Standardization
P-0-1311[165] Min.
P-0-1311[166] Max.
P-0-1311[167] Signal min.
P-0-1311[168] Signal max.
Threshold value
P-0-1389[7] Warning
P-0-1389[8] Error
Particle
concentration
P-0-1292 Average value
Page 29
P-0-1424 Actual value (S)
P-0-1389[61] Warning
P-0-1389[65] Error
P-0-1425 Actual value (M)
P-0-1389[62] Warning
P-0-1389[66] Error
P-0-1426 Actual value (L)
P-0-1389[63] Warning
P-0-1389[67] Error
P-0-1427 Actual value (XL)
P-0-1389[64] Warning
P-0-1389[68] Error
Standardization
P-0-1311[170] Min.
P-0-1311[171] Max.
P-0-1311[172] Min.
P-0-1311[173] Max.
Threshold value
P-0-1311[176] Starting signal
P-0-1311[177] Starting signal
P-0-1311[178] Delay
P-0-1311[179] Cycle
Parameter description