About this documentation 7/128
CytroBox, RE 51057-B/11.19, Bosch Rexroth AG
1 About this documentation
1.1 Validity of the documentation
This documentation applies to the following product:
• Hydraulic power unit typeCytroBox, for material numbers, refer to datasheet51057.
These operating instructions apply only to the hydraulic power unit as such.
Ifthebasic device is operated with other attachments, e.g. hydraulic control,
accumulator station, documentation is required for the entire scope of delivery.
This documentation is intended for assemblers, operators, service engineers and
system end-users and machine and system manufacturers.
This documentation contains important information on the safe and proper transport,
assembly, commissioning, operation, use, maintenance, disassembly and simple
troubleshooting of the product.
You should read this documentation thoroughly, and in particular chapter2
"Safety instructions" and chapter3 "General information on damage to property
and damage to product", before handling the hydraulic power unit.
1.2 Required and amending documentation
Also observe the operating instructions and documentation of the overall
machinery/system.
The hydraulic power unit must not be commissioned until you have been
provided with the documentation marked with the book symbol
and you have
understood and observed it.
Table 1: Required and amending documentation
Title Document number Document type
CytroBox hydraulic power unit
Technical data, operating conditions, performance limits and project planning
information
51057 Datasheet
Pressure relief valve, direct operated; typeDBD
Includes technical data, operating conditions and performance limits.
25402 Datasheet
Pressure relief valve, direct operated (safety valve according to Pressure
Equipment Directive2014/68/EU); typeDBD...1X/..E
Includes amending information on datasheet 25402.
25402-B Operating
instructions
Filter elements type1.; 2.; 4.; 6.; 7. and 20. Filter elements
Includes technical data, operating conditions and performance limits.
51420 Datasheet
Hydraulic fluids based on mineral oils and related hydrocarbons
Describes the requirements on hydraulic fluids on mineral oil basis and related
hydrocarbons for operation with Rexroth hydraulic components and helps you to
select a hydraulic fluid for your hydraulic system
90220 Datasheet
Environmentally compatible hydraulic fluids
Includes application notes and requirements for Rexroth hydraulic components.
90221 Datasheet
Sytronix, SvP 7020 IMC, variable-speed pump drives
Includes a description how to commission SvP 7020 IMC.
R911376148 Description of the
commissioning