be adjusted, reached and kept. Thereby, notice the details of the manu‐
facturer of the controller.
Record the set values of the motor purging in the commissioning log.
3. Activate the control device of motor purging.
4. Commission the drive system according to the instructions of the corre‐
sponding product documentation.
5. Record all done measures and set values about motor purging in the
commissioning log.
Sometimes, additional steps may be required for commissioning controllers
and control units. The inspection of the functioning and performance of the
systems is not object of these Operating Instructions; instead, it is carried out
within the framework of the commissioning of the machine as a whole. Ob‐
serve the machine manufacturer's specifications and instructions.
Bosch Rexroth AG DOK-MOTOR*-IDYN*A*EXPD-IB05-EN-P56/69
Rexroth MAD and MAF Motors in EX px d Design acc. to ATEX Directive 2014/34/EU
Commissioning
To Next Page
Loading...
