13 EC declaration of conformity
According to ATEX directive 2014/34/EU, the manufacturer
Bosch Rexroth AG
Buergermeister-Dr.-Nebel-Straße 2
97816 Lohr am Main, Germany
hereby declares that the products below
3-PHASE INDUCTION MOTOR
MAD...-...-...-.6-... MAF...-...-...-.6-...
from the date of manufacture 2016-04-20 were developed, designed and
manufactured in compliance with the above-mentioned EU directive.
Harmonized standards applied:
Standard Title Edition
EN 60079-0
(IEC 60079-0)
Explosive atmospheres - Part 0:
Equipment – General requirements
2012 + A11:2013 (2011, modified
+ Cor.:2012 + Cor.: 2013)
EN 60079-1
(IEC 60079-1)
Explosive atmospheres – Part 1:
Equipment protection by flameproof
enclosures „d“
2014 (2014)
EN 60079-2
(IEC 60079-2)
Explosive atmospheres – Part 2:
Equipment protection by pressurized
enclosure „p“
2014 (2014)
The motors have the following markings:
II 2G Ex px d IIB T3 Gb
Further explanations:
The product is intended solely for installation in an machine. For the product
to be used as intended the user must comply with the provisions of use and
conditions of application laid down in the instructions (DOK-MOTOR*-
IDYN*A*EXPD-IBxx-xx-x).
DOK-MOTOR*-IDYN*A*EXPD-IB05-EN-P Bosch Rexroth AG 61/69
Rexroth MAD and MAF Motors in EX px d Design acc. to ATEX Directive 2014/34/EU
EC declaration of conformity
To Next Page
Loading...
