Bosch Rexroth RA2-1/10 - Page 23

RE95230-B/2021-12-01, BoschRexrothAG
Installation | Analog amplifier RA 23/48
at least 12cm
approx.0.5cm
Fig� 10: Wires and/or lines in the insulation hose
2� Push the sleeve about 15cm over the insulation hose (cut to length).
Then insert the wires through the cable entry opening of the handle shell and
push the handle shell through to the sleeve.
– To make it easier to push the sleeve over the insulation hose, apply talcum
(or asuitable medium) to the insulation hose and the inside of the sleeve in
the area of the cable entry.
approx.15cm
Fig� 11: Sleeve and handle shell with inserted insulation hose