Bosch REXROTH VT-HDT Series - Accessory Components; Service Case VT-HDTSY-1-2 X; VT-HDTNT-5-2 X Power Supply

Bosch Rexroth GmbH Austria V1.08 / 2019-01 Page 11
Service case VT-HDTSY-1-2X
The service case contains the test device VT-HDT-1-2X, the
24 V power supply unit and the OBE-connection cable.
Depending on the order variant (see ordering code, page 2),
2 pieces of switching valve cables are included in the case.
Typ VT-HDTSY-1-2X
Technical data:
Design
Aluminum frame case with 2 locks, 3 hinges
Dimensions (B x H x D) mm
450 x 100 x 350
Weight kg
4,5
Power supply unit VT-HDTNT-5-2X
Table power supply unit 90-264 VAC → 24 VDC; 5 A
The power connector of the power supply unit fits sockets
in Germany and many other European countries.
In some countries, a country-specific adapter needs to be
used. This is not included in the scope of delivery.
Type VT-HDTNT-5-2X (actual product may differ)
Technical data:
Operating voltage U VAC
90…264; 47…63 Hz
Current consumption I
max
A
1,2
Fuse
electronic overload protection
Output voltage U VDC
24 ± 1 V; 5 A
Length of the power cable l m
approx. 1,5
Length of the cable to the test device l m
approx 1,5
Dimensions (B x H x D) mm
139 x 61 x 36
Weight m kg
0,46