Bosch REXROTH VT-HDT Series - Cables and Connectivity; OBE Connection Cable; Switching Valve Cable

Bosch Rexroth GmbH Austria V1.08 / 2019-01 Page 12
OBE-Connection cable VT-HDTK-1-2X
Connection cable between test device VT-HDT-1-2X and
proportional valves with integrated electronics (valves with
ordering code K9 and K31 for the electrical connection)
Type VT-HDTK-1-2X (actual product may differ)
Technical data:
Connection for valve
Mating connector according to DIN EN 175201-804
Connection for test device
Connector Amphenol MS3106A 14S 6P
Length of connection cable l m
3
Weight m kg
0,3
Cable for switching valve VT-HDTSK-1-2X
Connection cable between test device VT-HDT-1-2X and
switching valves with electrical connection K4.
Type VT-HDTSK-1-2X (actual product may differ)
Technical data:
Connection for valve
Connector acc. DIN EN 175301-803, 2-po. + PE
Connection for test device
Connector BKL 0202001
Length of connection cable l m
3
Weight m kg
0,2
Notices:
When operating valves with electrical connection
K31, the ground conductor is interrupted.