30/36 Valve amplifier VT-MSPA2-2X | Demounting and replacement
BOSCH REXROTH AG, Edition 02.2021, RE 30232-02-B
Proceed as follows to demount the VT-MSPA2-2X:
1. Disconnect connection cables and unplug connectors.
2. Loosen the latch from its snapped-in position using a screwdriver.
3. Carefully remove the VT-MSPA2-2X from the DIN rail while the latch is pulled
out.
Fig. 7: Removing the VT-MSPA2-2X from the DIN mounting rail
11.4 PREPARING THE COMPONENTS FOR STORAGE OR
FURTHER USE
Proceed as follows in order to prepare electronics from Bosch Rexroth for storage
and further use:
▶ Whenever possible, use the original packaging for storage.
▶ Observe the permissible storage temperature range given in data sheet RE
30232-02.
▶ Protect against dust and humidity.
To Next Page
Loading...
