32/40 Maintenance and repair
Bosch Rexroth AG, VT-VSPA2-1-2X/V0/T., RE 30110-B/11.2012
Condition as supplied:
WRZ: f = 170 Hz
WRA10 and "w"= 0: f = 380 Hz
WRA6 and "w"= 0: f = 350 Hz
9 Maintenance and repair
9.1 Cleaning and care (maintenance)
NOTICE
Operating failures!
Loss of functionality due to penetrating dirt and humidity
▶ Always provide for absolute cleanliness when working on the VT-VSPA2-1-2X
amplifier card.
▶ Only use a dry and dust-free cloth for all cleaning works.
9.2 Maintenance
In order to ensure a long life cycle and functionality, include the following activities
in your maintenance schedule for the VT-VSPA2-1-2X amplifier card:
▶ Check all clamping connections for correct seat and damage at least once per
year. Check lines for break or squeezing.
▶ Have defective or damaged devices exchanged immediately.
9.3 Repair
The VT-VSPA2-1-2X amplifier card can only be exchanged as whole unit. For safety
reasons, modifications at the VT-VSPA2-1-2X performed to one's own author-
ity are not admissible! Repair and maintenance works may only be performed by
BoschRexroth AG. For repair and maintenance works, send the device to the service
address specified in chapter 15.
To Next Page
Loading...
