Bosch Rexroth VT-VSPA2-1-2X Series - 10 Disassembly and Exchange; Preparing for Disassembly; Disassembling the Product; Preparing the Components for Storage;Further Use

Disassembly and exchange 33/40
RE 30110-B/11.2012, VT-VSPA2-1-2X/V0/T., Bosch Rexroth AG
10 Disassembly and exchange
10.1 Preparing for disassembly
NOTICE
Incorrectly performed disassembly!
The device might be destroyed!
▶ Decommission the entire system as described in the overall system manual.
▶ De-energize the device and all connected components.
10.2 Disassembling the product
Disassemble the amplifier card performing the steps described in chapter 7 "Installa-
tion" from page 24 onwards in reverse order.
10.3 Preparing the components for storage/further use
Proceed as follows in order to prepare the VT-VSPA2-1-2X amplifier card for storage
and further use:
▶ Only use the original packaging for storage.
▶ Comply with the admissible storage temperature range specified in RE 30110.
▶ Protect the amplifier card from dust and humidity.