Bosch Rexroth WGM - 5.1.9.1 Calling the Log Book; 5.1.9.2 Calling the Error Log Book

30/46 Operation
BoschRexrothAG, RE51550-B/09.2019
5.1.9.1 Calling the log book
The last 6 events of the logged switching output can be called up here and all entries
can be deleted:
The log entries are displayed in the following manner:
▶ Recent event
jORi
took placexhours (h) / days (d) ago
▶ Events 2 to 5 took placexhours / days ago
...
...
...
▶ Oldest event
jOR6
took placexhours / days ago
▶ Delete function (
---
)
Example:
jOR1
⇔
1.3
£
, key q
jOR2
⇔
2.4
£
, key q, p
jOR3
⇔
6.1
£
, key q, p
jOR4
⇔
8.2
£
, key q, p
jOR5
⇔
NON
*, key q, p
jOR6
⇔
NON
*, key q, p
---
, key p; u=delete
* not yet assigned,
there have been only 4
events
The index of the entryxis displayed alternating with the time, e.g.
jORi
⇔
1.4
£
for the most recent event 1.4 hours ago.
Press the u key to return to the submenu or use q, p to select the next
log entry.
Pressing the u key to confirm the display clears the event list
and returns to the submenu.
Notice:
If no events have been recorded, the display changes between
jORx
and
NON
.
5.1.9.2 Calling the error log book
Error messages can be called up and deleted here:
The error messages are deleted in the following manner:
▶ Display of the error number
▶ Delete function
Example:
0
, key q
---
, key p; u=delete
If an error occurs, the error number is displayed here (see table in
chapter Troubleshooting and remedy [> page35]).
Press the u key to return to the submenu or use q to select the display
Confirm the display with the u key to reset the error messages.