What You Need to Know
Before using this manual, you should become familiar with the Security System User’s Guide. The
User’s Guide provides step by step instructions for using command center functions. It also gives
definitions of the command center displays and the security system’s memory logger event
descriptions.
Individual users learn the basic steps needed to operate the security system from the Security
System User’s Guide.
How to Use This Manual
Use this manual to perform advanced system functions like add and delete user passcodes, reassign
authority levels to user passcodes and operate or change programmed scheduled events (Skeds)
from the command centers. As you make changes to the system, update the information contained
in the tables in this guide to provide an accurate account of the programmed information.
Your Custom Display
“At an idle state” means that the system is not currently performing a function entered by a user.
There are three idle states the system may be in:
• Turned on (Armed)
• Turned off (Disarmed) with no points faulted (doors or windows open) in the area
• Turned off with faulted points (doors or windows open) in the area.
This guide uses the default idle state displays for examples of these idle states. Your security
company may have programmed custom text for the idle displays. The User’s Guide describes the
idle displays in your panel.
To Next Page
Loading...
Need help?
General
