PRINT LOG ?
Description
The Print Log function lets you print the events stored in your security system’s log. You can
choose to print the entire log or set a start date and print the events recorded from that date up to
today.
Your system must include a printer interface and a printer to perform this function.
Using Print Log
1. Ensure your command center is at idle text.
2. Press [9] and then [9] again and then [ENT].
Note: If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the [MENU] key to enter the Command Menu, then press [NEXT] repeatedly until you
reach the PRINT LOG ? prompt. Press [ENT].
3. VIEW LOG ? displays.
• Press [NEXT] until PRINT LOG ? scrolls into the display.
4. Press [ENT].
5. ENTER START DATE displays.
• To print part of the log, enter the date (month and day, MMDD) at which you wish to
start the review. Press [ENT].
• To print the entire log, press [ENT] without entering a start date.
6. PRINTING EVENTS displays during printing. Each event appears in a line that includes the
date and time, area and type of event. See your printer interface user’s guide for more information.
To Next Page
Loading...
Need help?
General
